Altech MultiPro 2000 Uživatelská příručka stáhnout pdf (Strana 8)

AC Sensing: True RMS on MP520 and MP530

Auto Power Off: After 17 minutes of inactivity with no input signal

Safety: The MultiPro™ Series meters are intended for indoor use

and protected, against the users, by double insulation per

EN61010-1 and IEC61010-1 2nd Edition (2001) to CAT III

1000V & CAT IV 600V. The meter (all versions) also

meets UL3111-1(1994)* and CSA C22.2 No. 1010-1-92*

to CAT III 1000V.

Terminals (to COM) ratings:

V : CATEGORY III 1000 VOLTS AC & DC, AND

CATEGORY IV* 600 VOLTS AC & DC.

A / MA

A : CATEGORY III AND CATEGORY IV* 500

VOLTS AC AND 300 VOLTS DC.

*Category IV safety standard (for DMMs) was first released in

IEC61010-1 2nd Edition in year 2001, and was yet an UL published

standard at the time this manual was written.

UL Certification: The meter that bears the UL markings, if any, has

been investigated by UL headquarter in the USA per

UL standard UL3111-1 1st Ed to its highest CAT III

rating and international standard IEC61010-1 Second

Edition (year 2001) to CAT IV rating. The UL

markings on the meter, where applicable, are marked

as “UL Listed Cat III only” and “UL Classified to

IEC61010-1 2nd Ed. Cat IV”.

E.M.C.: Meets EN61326(1997, 1998/A1), EN61000-4-2(1995) and

EN61000-4-3(1996). Also meets former standards EN55011

(1991) and EN50082-1(1997)

In an RF field of 3V/m: Capacitance function is not specified

Other function ranges: Total Accuracy = Specified Accuracy +

30 digits. Performance above 3V/m is not specified

Overload Protection:

µA/mA Range: 0.63/500V, IR 200kA, F fuse.

A Range:

12.5A/500V IR 20kA, F fuse.

V Range:

1050V rms, 1450V peak

mV, Ω and other:

600VDC/VAC rms

Power Consumption: 2.7 mA typical

Dimension: 7.32 x 3.43 x 1.4" with holster (186mm x 87mm x 35.5mm)

Weight: 15.17 oz. with holster (430g)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

Altech MultiPro 2000 Uživatelská příručka Strana 8